Bending Beam Load Cell PR6207

The load cell PR6207 is specially designed for tank and hopper weighing and for the use in platform scales or belt weighers. A particular design characteristic is that the sensor is manufactured out of stainless steel (1.4122) and the membrane is made out of 1.4541.

Product profile

The load cell PR6207 is specially designed for tank and hopper weighing and for the use in platform scales or belt weighers. The design principle of the mounting kit PR6007 will counterbalance movements arising from mechanical and thermal expansion or contraction of its supporting structure. A particular design characteristic is that the sensor is manufactured out of stainless steel (1.4122) and the membrane is made out of 1.4541. Therefore the line is distinguished with high measurement accuracy and high repeatability as well as stability and reliability. This is the sound basis for maintenance free work and years without any further adjustments. The hermetically sealed sensor allows to use the device even under extreme operation conditions. The entire measurement chain can be calibrated without using a reference weight. Due to "matched output" technology, a damaged load cell can be exchanged without the need of re-calibration. This saves a tremendous amount of time during commissioning and in case of necessary replacement.

Load cell construction

Double bending beam, all stainless steel, hermetically sealed, welded, filled with inert gas.

Material Body

Body 1.4122 (DIN 17440); Bellow 1.4541 (DIN 17440)

Protection

IP 67, DIN 40 050. The load cell can be submerged in water to a depth of 1.5m for 100hrs.

robust, flexible, screened 4 x 0.34mm2

• sheath: grey, PVC

• diameter: D = 5.4mm

• length: 3m

Bending radius

fixed installation r ≥ 60mm; with repeated bending r ≥ 150mm