Vacuum Mass Comparator
Brand : Sartorius
Sartorius has mastered the core disciplines of weighing like no other company. Sartorius sets new standards in mass metrology. In cooperation with the Bureau International des Poids et Mesures and the Institute for Process Measurement and Sensor Technology of the Technical University of Ilmenau, Sartorius has developed a mass comparator — the CCL1007 — that is capable of determining differences in mass to an accuracy of 0.1 μg for weights of 1 kg — even under high-vacuum conditions.
Description
Sartorius has mastered the core disciplines of weighing like no other company. Sartorius sets new standards in mass metrology. In cooperation with the Bureau International des Poids et Mesures and the Institute for Process Measurement and Sensor Technology of the Technical University of Ilmenau, Sartorius has developed a mass comparator — the CCL1007 — that is capable of determining differences in mass to an accuracy of 0.1 μg for weights of 1 kg — even under high-vacuum conditions.
- The comparator is protected from environmental effects by a pressure-stable, non-magnetic aluminum chamber.
- The unique three-point holder is capable of handling both cylindrical weights and silicon spheres efficiently.
- The weigh cell is located in the upper section of the vacuum chamber. The weighing pan for the substitution weights is accessed via the upper loading hatch.
- The motors that drive the load alternator and the weight changing device are located outside the vacuum chamber. This
- reduces interference caused by temperature fluctuations.
- All components inside the vacuum chamber are completely resistant to high vacuum and, therefore, will not outgas under vacuum. This prevents any contamination of the weights.
- The more than 20 vacuum flanges enable additional sensors to be introduced into the vacuum chamber, which has sufficient space to accommodate additional measuring instruments.
- Inclusive Printer and PC
Specification
Product properties
Maximum capacity |
1,031 kg
|
Readability |
0,1 µg
|
Repeatability (typical), s |
0.1 µg
|
Technical attributes
Application Area |
1 mg - 1 kg
|
Repeatability |
0,2 µg
|
Electronic weighing range & taring range |
2 g
|
Load alternator |
9
|
Centermatic |
Yes
|
Control unit |
Yes
|
PC Software |
Yes
|
Weighing pan diameter |
50 mm
|
Sample size (WxD) |
34-95x110 mm
|
Diameter range for a silicon sphere |
45 - 100 mm
|