Robot System Mass Comparator
Brand : Sartorius
Robot systems for mass comparison of reference weights and test weights. The fully automated mass comparator simplifies work in the mass laboratory. This enables complete sets of mass standards and test weights to be measured efficiently within the shortest time possible. The weighing mode is entered on the PC, the number of comparison cycles is defined and a direct 1:1 mass comparison or subdivision (disseminationof mass for class E1 weights) is initiated by the robot system.
Description
Robot systems for mass comparison of reference weights and test weights. The fully automated mass comparator simplifies work in the mass laboratory. This enables complete sets of mass standards and test weights to be measured efficiently within the shortest time possible. The weighing mode is entered on the PC, the number of comparison cycles is defined and a direct 1:1 mass comparison or subdivision (disseminationof mass for class E1 weights) is initiated by the robot system
- The comb-type grippers accommodate a group of up to four weights
- The grippers simultaneously place weight groups on the weighing pan, thus ensuring quick changes of reference and test weight combinations on the mass comparator
- Direct 1:1 mass comparison and mass dissemination of class E1 weights is possible
- Prior to mass comparison, the robot automatically selects and prepares the groups of weights required for dissemination of mass
- The weight grippers are designed so that any weight shapes, such as wire and leaf weights as well as knob, cylindrical and disk weights can be handled efficiently
- PC inclusive
Specification
CCR 10
Product properties
Maximum capacity |
10,5 g
|
Readability |
0,1 µg
|
Repeatability (typical), s |
0.2 µg
|
Technical attributes
Application Area |
1 mg - 10 g
|
Repeatability |
0,5 µg
|
Electronic weighing range & taring range |
3.5 g
|
Load alternator |
2
|
Magazine positions |
39 Pos.
|
Centermatic |
no
|
Control unit |
yes
|
PC Software |
yes
|
Air temperature sensor |
3
|
Air moisture sensor |
1
|
Air pressure sensor |
1
|
Weighing pan dimensions |
49 x 29 mm
|
Sample size (WxD) |
18 x 20 mm
|
Dimensions (WxDxH) |
1900 x 250 x 2328 mm
|
CCR10-1000
roduct properties
Maximum capacity |
1,002 kg
|
Readability |
0,1 µg | 1 µg
|
Repeatability (typical), s |
0.2 µg | 2 µg
|
Technical attributes
Load alternator |
2 | 2
|
Air pressure sensor |
1
|
Application Area |
1 mg - 1 kg
|
Repeatability |
0,5 | 8 µg
|
Electronic weighing range & taring range |
3.5 g | 2 g
|
Magazine positions |
39 | 23 Pos.
|
Centermatic |
no | yes
|
Control unit |
yes
|
PC Software |
yes
|
Air temperature sensor |
3
|
Air moisture sensor |
1
|
Weighing pan dimensions |
49 x 29 mm | 104 x 68 mm
|
Sample size (WxD) |
18 x 20 mm | 100 x 120 mm
|
Dimensions (WxDxH) |
1900 x 1250 x 2328 mm
|
CCR1000
Product properties
Maximum capacity |
1,002 kg
|
Readability |
1 µg
|
Repeatability (typical), s |
2 µg
|
Technical attributes
Application Area |
10 g - 1 kg
|
Repeatability |
8 µg
|
Electronic weighing range & taring range |
2 g
|
Load alternator |
2
|
Magazine positions |
23 Pos.
|
Centermatic |
yes
|
Control unit |
yes
|
PC Software |
yes
|
Air temperature sensor |
3
|
Air moisture sensor |
1
|
Air pressure sensor |
1
|
Weighing pan dimensions |
104 x 68 mm
|
Sample size (WxD) |
100 x 120 mm
|
Dimensions (WxDxH) |
1900 x 250 x 2328 mm
|