CERTOMAT BS-1
Brand : Sartorius
Large incubation shaker, programmable speed (40 to 400 rpm) and temperature plus illumination, with optional integrated cooling, stackable up to three units without speed reduction, suitable for bacteria, yeast, insect and plant cell cultures.
Description
Description
Incubation shaker CERTOMAT® BS-1 is suited for the growth of bacteria, yeast, insect and plant cells in a temperature-controlled environment from 8 °C above ambient temperature up to 70 °C. With an optional integrated cooling unit, the temperature range can be extended to 10 °C below ambient temperature. Also available is an optional illumination unit for growth of photosynthetic organisms. CERTOMAT® BS-1 can be programmed to operate for specified periods at defined ranges of speed and temperature plus illumination. Five programs, each consisting of four steps and one pre-step, can be defined and stored. The menue language can be selected by the user. CERTOMAT® BS-1 units can be stacked three units high in order to save valuable lab space. Due to the patented adjustable mass compensation system, all three stacked units can be run at maximum speed even when fully loaded.
Obligatory Shaker Accessories
To make it functional, every CERTOMAT® shaker or incubation shaker requires a tray. Available tray sizes are 420 x 420 mm (E/EU) and 800 x 420 mm (F/FU). Suitable trays, clamps and further accessories are listed with each instrument.
Specification
| Interior dimensions (WxDxH) |
89 x 65 x 49,5 cm
|
| Orbital shaking amplitude |
25 mm
|
| Stacking |
Up to 3 units without speed reduction
|
| Heating capacity |
650 W
|
| Cooling capacity |
none
|
| Accuracy |
Max. ±1 % of final value
|
| Line voltage |
230 V
|
| Line frequency |
50 Hertz
|
| External Width |
115 cm
|
| External Height |
72 cm
|
| External Depth |
77 cm
|
| Drive mechanism |
Brushless motor with triple eccentric drive and adjustable mass compensation
|
| Recommended trays |
Type F / FU ( 420 x 800 mm) and Type E / EU (420 x 420 mm)
|
| Tray fixation |
Easy snap mechanism
|
| Maximum load | |
| Protection type |
IP21
|
| Connections |
Class 1 cold socket, separate cable approx 3m
|
| Protection class |
I
|
| Heating capacity |
650 W
|
| Fuses |
2 x T6,3 A at 230 V, 2 x T10 A at 115 V
|
| Interference |
According to DIN EN 55022 and DIN EN 61000
|
| Mode |
Orbital
|
| Amplitude |
25 / 50 mm
|
| Shaking speed |
40 - 400 rpm
|
| Temperature range |
+ 8 - +70 °C
|
| Temperature range with external cooling |
-10 - +70 °C
|
| Display |
LCD, alphanumeric
|
| Air circulation |
ca. 180 m³/h
|
| Parameters |
Speed, time, temperature, illumination (optional)
|
| Timing |
Date, hour, minute
|
| Programs |
up to 5 programs, with cycling
|
| Memory |
Restart after power failure
|
| Alarms |
Acoustic and visual
|
| Relative humidity |
Avoid extreme humidity
|
| Analogue out |
For speed and temperature, 9-pin SUB-D socket, 0 to 10 V or 0 to 20 mA resp. 4 to 20 mA (modification by technical service)
|
| Digital out |
For speed and temperature, printout via RS232 interface, initiated by pressing START button during action, and for service functions
|
| Housing Material |
Steel construction with stainless steel interior
|
| Weight |
198 kg
|
